Publications

This page summarizes papers and reports related to the WDRT.

Citation

If you desire to cite WDRT in a publication, please use the following bibtex key:

@WWW{WDRT,
  author = {Ryan G. Coe and Carlos Michelen and Aubrey Eckert-Gallup and Nevin Martin and Yi-Hsiang Yu and Jennifer van Rij and Eliot W. Quon and Lance Manuel and Phong Nguyen and Tyler Esterly and Bibiana Seng and Zacharia Stuart and Jarred Canning},
  title  = {{WEC} {Design Response Toolbox} ({WDRT})},
  year   = {2018},
  url    = {http://wec-sim.github.io/WDRT},
}

Related publications

– P. Nguyen, L. Manuel, R.G. Coe, On the development of an efficient surrogate model for predicting long-term extreme loads on a wave energy converter, in Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2018), Madrid, Spain. ASME, 2018.

– J. van Rij, Y.-H. Yu, R.G. Coe, Design Load Analysis for Wave Energy Convertors, in Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2018), Madrid, Spain. ASME, 2018.

– S.J. Edwards, R.G. Coe, The effect of environmental contour selection on expected WEC response, Journal of Offshore Mechanics and Arctic Engineering, vol. 141, no. 1, 2018.

– R.G. Coe, C. Michelen, A. Eckert-Gallup and C. Sallaberry, Full Long-term Design Response Analysis of a Wave Energy Converter, Renewable Energy, vol. 116, p. 356 – 366, 2018.

– R.G. Coe, Y.-H. Yu, J. van Rij, A survey of WEC reliability, survival, and design practices, Energies, vol. 11, no. 1, p. 4, 2018.

– V.S. Neary, R.G. Coe, J. Cruz, K. Hass, G. Bacelli, Y. Debruyne, S. Ahn, Classification systems for wave energy resources and WEC technologies, in Proceedings of the 12th European Wave and Tidal Energy Conference (EWTEC2017), Cork, Ireland, 2017.

– Y. Guo, Y.-H. Yu, J. van Rij, N.M. Tom, Inclusion of Structural Flexibility in Design Load Analysis for Wave Energy Converters, in Proceedings of the European Wave and Tidal Energy Conference (EWTEC2017), Cork, Ireland, 2017.

– J. Canning, S. Edwards, T. Esterly, B. Seng, L. Smith, W. Stuart, N. Martin, A. Eckert-Gallup, R.G. Coe, WEC Extreme Conditions Modeling Sandia Summer Intern 2017 Report, SAND2017-10592, Sandia National Laboratories, Albuquerque, NM, 2017.

– J. Canning, P. Nguyen, L. Manuel, R. Coe, On the long-term reliability analysis of a point absorber wave energy converter, in Proceedings of the ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2017), ASME, Trondheim, Norway, 2017.

– J. van Rij, Y.-H. Yu, and Y. Guo., Structural Loads Analysis for Wave Energy Converters, in Proceedings of the 36th International Conference on Ocean, Offshore & Arctic Engineering (OMAE2017), ASME, Trondheim, Norway, 2017.

– L. Manuel, P. Nguyen, J. Canning, R. Coe, A.C. Eckert-Gallup, On the selection of sea states in assessing extreme loads on a wave energy converter, in: Proceedings of the 5th Marine Energy Technology Symposium (METS), Washington, D.C., 2017.

– A. Eckert-Gallup, and N. Martin, Kernel density estimation (KDE) with adaptive bandwidth selection for environmental contours of extreme sea states, in: OCEANS 2016, MTS/IEEE, Monterey, CA, 2016.

– L. Manuel, J. Canning, R. G. Coe, C. Michelen, On the short-term uncertainty in performance of a point absorber wave energy converter, in: Proceedings of the 4th Marine Energy Technology Symposium (METS), Washington, D.C., 2016.

– C. Michelen, R.G. Coe, Y. Yu and Q. Wang, Tool for distributed pressure time-histories of marine structures: verification and case study with a WEC, Proceedings of the 4th Marine Energy Technology Symposium (METS), Washington, D.C., 2016.

– R. G. Coe, C. Michelen, A. Eckert-Gallup, Y. Yu and J. van Rij, WDRT: A toolbox for design-response analysis of wave energy converters, in: Proceedings of the 4th Marine Energy Technology Symposium (METS), Washington, D.C., 2016.

– E. Quon, A. Platt, Y.-H. Yu, M. Lawson, Application of the Most Likely Extreme Response Method for Wave Energy Converters, in: Proceedings of the 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016), ASME, Busan, South Korea, 2016.

– A. C. Eckert-Gallup, C. J. Sallaberry, A. R. Dallman, V. S. Neary, Application of principal component analysis (PCA) and improved joint probability distributions to the inverse first-order reliability method (I-FORM) for predicting extreme sea states, Ocean Engineering, vol. 112, p. 307 – 319, 2016.

– C. Michelen, R. Coe, Comparison of methods for estimating short-term extreme response of wave energy converters, in: OCEANS 2015 - MTS/IEEE Washington, MTS/IEEE, Washington, D.C., 2015.

– Y.-H. Yu, J. Van Rij, R. G. Coe, M. Lawson, Development and application of a methodology for predicting wave energy converters design load, in: Proceedings of the 34th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2015), ASME, St. Johns, Canada, 2015.

– A. C. Eckert-Gallup, C. J. Sallaberry, A. R. Dallman, V. S. Neary, Modified inverse first order reliability method (I-FORM) for predicting extreme sea states, Tech. Rep. SAND2014-17550, Sandia National Laboratories, Albuquerque, NM, 2014.

– R. Coe, V. Neary, M. Lawson, Y.-H. Yu, J. Weber, Extreme conditions modeling workshop report, Tech. Rep. NREL/ TP-5000-62305 SNL/ SAND2014-16384R, Sandia National Laboratories, Albuquerque, New Mexico, 2014.

– R. G. Coe, V. S. Neary, Review of methods for modeling wave energy converter survival in extreme sea states, in: Proceedings of the 2nd Marine Energy Technology Symposium (METS), Seattle, WA, USA, 2014.